【求助】[已解决]最近进的BOSS ME25在电脑上装不了驱动怎么破……？

首先发它给的提示

Installation

*        Before installing the driver, insert the plug into the INPUT jack on the ME-25. (Switch on the power.)
Never disconnect the plug from the INPUT jack while the ME-25 is in use. (The power must not be switched off.)
*        To reinstall or update the driver, refer to "To reinstall."
1.Start up Windows with all USB cables disconnected.
(except for keyboard and mouse)

2.Exit all applications before you begin the installation.

3.Double-click Setup.exe.
*        If a "Install Program As Other User" dialog box appears, click [Cancel] to quit the installation and then perform the installation as an administrative account.


4.The message "ME-25 Driver will be installed on your computer. ---" will appear. Click [Next].
*        If any other message appears, follow the directions of the message.

5.Click [Next] to begin installation.

6.If the "Software Installation" dialog box appears, click [Continue Anyway] to proceed with the installation.
*        If you cannot proceed with the installation, click [OK] to cancel the installation, and then refer to "Driver Signing Options setting."

7.The message "Ready to install the driver. ---" will appear.
*        If any other message appears, follow the directions of the message.

8.Use a USB cable to connect the ME-25 to your computer.
     1.Wait until the lower right of the screen indicates "Found New Hardware" and the "Found New Hardware Wizard" appears.
     *        It may take some time for the "Found New Hardware Wizard" to appear.
     2.If you are asked whether you want to connect to Windows Update, choose "No" and then click [Next].
     3.Choose "Install the software automatically (Recommended)" and click [Next].
     4.If the "Hardware Installation" dialog box appears, click [Continue Anyway] to proceed with the installation.
*        If you cannot proceed with the installation, click [OK] to cancel the installation, and then refer to "Driver Signing Options setting."
      5.If the "Completing the Found New Hardware Wizard" appears, Click [Finish].

9.When the "Installation has been completed." message appears, installation has been completed.
Click [Close] to close the "Driver Setup" dialog box.

10.If the "System Setting Change" dialog box appears, click [Yes] to restart Windows.

11.Refer to "Before you begin," and make the necessary settings for using the ME-25. You won't be able to use the ME-25 unless you make these settings.
*        If you are unable to use the ME-25 after connecting it, it's possible that a problem has occurred. Refer to "Troubleshooting."


这是它给的提示，我都是一步一步按着来的。

结果我就卡在

9.When the "Installation has been completed." message appears, installation has been completed.
Click [Close] to close the "Driver Setup" dialog box.

这一步了，他的安装程序就卡在一直没有“下一步”可以按。
另外虽然已经按照它说的Choose "Install the software automatically (Recommended)" and click [Next](自动选择驱动安装)，但是最后左下角还是显示硬件不能正常使用。

此贴果断要沉么= =;难道就没人用过ME25内录……来自: WindowsPhone客户端

你的声卡不行吧。。

xyl1234 发表于 2013-3-17 10:53
你的声卡不行吧。。

这跟声卡没关系吧……ME25接入后本身就充当声卡位置啊……

不要沉啊啊啊!!!!!!!解决不了我怎么内录出作品啊!!!???来自: WindowsPhone客户端

到GC下份 驱动  安装时再插上USB  

ME-25还能当声卡呢？用了几年都没发现= =

绿坝娘前男友 发表于 2013-3-17 12:39
到GC下份 驱动  安装时再插上USB

我想说的是……我用的是原装CD安装的额= =;

wjwk 发表于 2013-3-17 14:27
ME-25还能当声卡呢？用了几年都没发现= =

ME系列似乎都可以= =;而且它还有个专门的内录软件……

难道我真的得去GC发帖么= =;……来自: WindowsPhone客户端